Trellis Doors

What is the Saftidor Trackless Barrier?

The Saftidor Trackless Barrier operates on a series of steel reinforced trolleys & can be completely mobile.  It can span an unlimited width at any angle and without the need for any mullions. Storage space is not an issue as the systems can be stored off the premises.  These barriers can be made to a maximum height of 2.5 metres.

As an alternative to a completely mobile unit, this product can pivot or rotate up to 270° so as not to restrict clear opening width.  A curved configuration is also available.

Also available is a specially developed manual handling trolley, which allows a large span trackless barrier to be operated by a single person.

Why should I choose the Saftidor Trackless Barrier?

The Saftidor Trackless Barrier is completely trackless. It is suitable for barrier access for shopping malls, factory units, car parks, loading docks, function centres, crowd control and partitioning.  It can also be used to solve many Occupational Health and Safety issues; for instance they provide a protective barrier against machinery and also can be used to secure loading docks, preventing the public from wandering into factories and warehouses during trading hours.

A very unobtrusive system, the Saftidor Trackless Barrier can be removed from where it is being used, wheeled away and stored almost anywhere.

This product has been treated, epoxy powder coated and galvanised against corrosion.

Being a trackless barrier, this system can be used even in the absence of fixing points through its floor shoot bolts or a removable lockable bollard.  A typical example includes securing an area in a shopping centre between 2 (two) glass shop fronts. The removable bollards allow lock up without attaching onto the glass shop front, by locking down onto a laser cut stainless steel plate positioned on the floor.

Technical Specifications

Materials - The expanding steel diamond pattern trellis is made from 12mm steel square tube.  The expanding trellis consists of square steel sections which are rigidly connected by means of high tensile rivets. The linkages are all high grade steel square channels.

Steel posts and trolley bases are made from 38mm square steel tube.  Bottom feet are 400mm wide.

Rivets - The rivets are used in a non-pivoting function to minimise wear and tear and maximise life and strength.

Locks - The locking mechanism comprises a security slam lock with high grade double hooks and locating pins for added strength and security.  The doors can lock left, right or centre.

Colour Range - The doors are available in 2 standard exterior quality epoxy powder coatings i.e. black and white.  Cream and charcoal are available in limited sizes.  Individual colour schemes can be matched to suit almost any environment.  Channel sections are epoxy coated and galvanised against corrosion. The steel sections are finished in a high gloss epoxy powder coat.

To unlock and remove Trackless Barrier from the installed position:

1. Unlock all slam locks for ease and safety of operation
2. Raise all shoot bolts from floor position
3. 1 (one) man either end of lattice system – push to compress into stack position: mind your fingers
4. 1 (one) man either end – 1 (one) to push and 1 (one) to pull to move system into storage location

Be Mindful of Public Safety at All Times

Be Mindful Of Public Safety At All Times

General

Security365 recommends to its customers that

• All locks provided should be used to separate systems for ease and safety of operation when moving barrier from a fixed position to another location
• All shoot bolts provided on each “ T “ base should be used for safety and stability
• 2 (two) men at all times to operate
• The barriers may impact on the premises emergency exits.  Please consult with necessary authorities in evaluating this risk.  Security365 assumes that where required, the customer has obtained the necessary council, government, statutory or body corporate permission.