Roller Shutters & Roller Grilles

It is a system of interlocking, architectural strength, 44mm tall aluminium slats, with a double 1.5mm extruded walled profile for extra strength.  This shutter can be controlled manually or electronically.  Manual operation is push up or pull down, assisted by springs, and lockable with a key.  Motorised shutters can be operated with either key switch or remote control.Clear anodised is the standard, whilst Dulux powder coat range is available as an optional extra.

Why should I choose the 44mm Extruded Shutter for my Business?

Quality and strength - Ideal for securing shop fronts, club and hotel bars, counter tops, kiosks, arcades, servereys and doorways, the 44mm Extruded Shutter has a double walled extruded profile for extra strength.  This roller shutter security system comprises a curtain of interlocking heavy duty extruded marine grade aluminium slats forming a solid security barrier.

These shutters can be manufactured up to a width of 3.0m or a total of 9 square metres. Larger openings can be fitted with multiple doors with a combination of standard or corner mullions.

A 12 month warranty against defective materials and workmanship applies.

Technical Specifications

Curtain - The curtain is constructed using interlocked 44mm x 1.5mm extruded aluminium slats; the design of the slat produces a flat front surface ideal for counter shutter application. The ends of these aluminium sections are fitted with a nylon end clip to ensure quiet and smooth operation.

Bottom Rail - The bottom rail is manufactured from an extruded aluminium section 65mm in height and 10mm in width. The locking mechanism for the shutter is concealed in this rail and can be key-operated from both sides.

Locking - Locking is a two way key mortice lock mounted in the centre of the bottom rail that slides a steel shoot bolt out into the side guides. Standard locking position allows for double-sided locking with operation from both inside and out.  Multiple doors can also be keyed alike.

Side Guides - Side Guides are 37mm deep by 25mm wide extruded aluminium suitable for face fit or through the mouth of the guide if fitted between walls.

Mullions - The standard 180 degree mullion is manufactured from an extruded aluminium section 130mm wide x 32mm; a steel shoot bolt secures the mullion into the floor or counter top. Special mullions are also available to suit a variety of degrees and applications.

Brackets - Brackets are manufactured from slotted 90mm x 40mm mild steel.

Drum - The drum is manufactured using a 60mm diameter tube fitted with an internal spring designed to counterbalance the operation of the shutter

Note:  Technical specifications may change without notice, always consult your Security365 representative.